Kenmore Mod 70 has self leveling rear legs. How are the back legs adjusted and locked?How to level clothes washer.?
You have to level the front legs first by turning the knobs in or out. Use a level across the front to make sure it is perfectly level. Once you have the front level you need to pull the back of the machine forward so that the rear legs are lifted off the floor by 10 to 12 inches and then set it back down. This will level the rear legs. They will lock themselves.How to level clothes washer.?
If it has self leveling screws then you just turn them in or out by hand or by an open end wrench or spanner if you need one. It may also have a lock nut on the shaft of the screw that can be tightened against the frame of the washing machine enclosure. Use any kind of level on top of the washer in two mutually perpendicular directions to make sure it is level and stable.
alot of washers are self leveling but the feet of the washer just screw just turn them to level , they might be hard to do..but theres no trick to it
Thursday, January 7, 2010
When you guys go to buy a new lets say washer or dryer.....?
Do you look up on the computer about complaints against the company or complaints about the item you are buying....you should. I just checked on an appliance Sears sells.....look out. Be sure before you buy anything you call to see if there is a repair shop by you, matter of fact check to be sure there are 2 or 3 ask how good or bad the appliance is you are thinking of buying and how easy/hard it is to get parts...You will be amazed, and you will save big bucks.When you guys go to buy a new lets say washer or dryer.....?
Great advice, and yes I do this always...saves headaches and heartaches later on.
Great advice, and yes I do this always...saves headaches and heartaches later on.
I have an GE washer model WB1R1060T it will wash but will not spin how can I fix it?
Call a GE Repair person.I have an GE washer model WB1R1060T it will wash but will not spin how can I fix it?
Nearly all of that type of trouble is caused by a bad cycle timer. Unless you are confident that you can tear down the machine, replace the timer, and put it back together, it's repairman time.I have an GE washer model WB1R1060T it will wash but will not spin how can I fix it?
Assuming your washer is a belt drive, the problem might be as simple as a loose or broken electrical connection to the wig wag. The wig wag is a magnetically controlled apparatus that changes the agitation and spin modes in the transmission.. If you go to the following web site and scroll down to '; Sears/ Kenmore/ Whirlpool/ Roper (belt drive) and on down to the line that references wig-wag It will show you a picture of it. Check the wiring going to it to make sure it is secure. http://www.american-appliance.com/servic鈥?/a> To read more about the wig wag go to: http://en.wikipedia.org/wiki/Wig_wag_(wa鈥?/a> ...Good Luck...
Could be the lid switch.......spin/rinse cycle normally will not work if lid is open..or switch is broken. IF YOU KNOW WHAT YOU';RE DOING......you can short out the switch to see if that's the problem. If not sure....get a serviceman.
Good luck
Nearly all of that type of trouble is caused by a bad cycle timer. Unless you are confident that you can tear down the machine, replace the timer, and put it back together, it's repairman time.I have an GE washer model WB1R1060T it will wash but will not spin how can I fix it?
Assuming your washer is a belt drive, the problem might be as simple as a loose or broken electrical connection to the wig wag. The wig wag is a magnetically controlled apparatus that changes the agitation and spin modes in the transmission.. If you go to the following web site and scroll down to '; Sears/ Kenmore/ Whirlpool/ Roper (belt drive) and on down to the line that references wig-wag It will show you a picture of it. Check the wiring going to it to make sure it is secure. http://www.american-appliance.com/servic鈥?/a> To read more about the wig wag go to: http://en.wikipedia.org/wiki/Wig_wag_(wa鈥?/a> ...Good Luck...
Could be the lid switch.......spin/rinse cycle normally will not work if lid is open..or switch is broken. IF YOU KNOW WHAT YOU';RE DOING......you can short out the switch to see if that's the problem. If not sure....get a serviceman.
Good luck
Is a Washer Seat just another washer??
I replaced an all but disintegrated washer from a stem in the shower and it didn't fix my leak, Someone wrote that my next step is to replce the Washer Seat behind it. But is this ';seat'; metal, rubber or what? Be sure to leave your email so I can follow up.Is a Washer Seat just another washer??
The washer seat is the part of the faucet that the washer contacts. It is probably metal and can be taken out by inserting an allen wrench of the correct size and turning counter-clockwise. (righty-tighty,lefty-loosey). Take the seat to your local hardware store and match it up with a new one. Usually the hot water side goes out first, so you might consider replacing both at the same time. Contact me by clicking on my handle.Is a Washer Seat just another washer??
the rubber seats against a machined brass seat. if it is pitted it needs to be removed with a seat wrench and replace with a new seat. good luck finding a supply house that has a seat for a forty year old valve. you are going to have to either walk on this one or install a new valve. i hope you don't have a handyman business...good luck
The seat is metal and inside the valve. You will need to buy some new seats and a wrench to remove and install the new one.
Anyone at a hardware store can help you with questions.
The 'seat' is the brass or pot metal that the washer seals against. If yours is corroded, like it was chromed, and the chrome has lifted, it tears up the washer, and needs to be replaced!
Put in a new washer, too!
And, you already have anyones email, if they allow it, on the jpage that pops up when you click the name! And, there are DIY and ANSWER forums on the web, just search google!wrinkles cream
The washer seat is the part of the faucet that the washer contacts. It is probably metal and can be taken out by inserting an allen wrench of the correct size and turning counter-clockwise. (righty-tighty,lefty-loosey). Take the seat to your local hardware store and match it up with a new one. Usually the hot water side goes out first, so you might consider replacing both at the same time. Contact me by clicking on my handle.Is a Washer Seat just another washer??
the rubber seats against a machined brass seat. if it is pitted it needs to be removed with a seat wrench and replace with a new seat. good luck finding a supply house that has a seat for a forty year old valve. you are going to have to either walk on this one or install a new valve. i hope you don't have a handyman business...good luck
The seat is metal and inside the valve. You will need to buy some new seats and a wrench to remove and install the new one.
Anyone at a hardware store can help you with questions.
The 'seat' is the brass or pot metal that the washer seals against. If yours is corroded, like it was chromed, and the chrome has lifted, it tears up the washer, and needs to be replaced!
Put in a new washer, too!
And, you already have anyones email, if they allow it, on the jpage that pops up when you click the name! And, there are DIY and ANSWER forums on the web, just search google!
When do you know when to use the disk and washer method?
Disk and washer methods are methods for solving the volume formed by revolving a function(s) about an axis. The disk method is used when the volume enclosed is solid (like if you have x^2 that you rotate about the y or x axis). The washer method is used when the enclosed volume is not solid from all the way to the axis (like if you had the region between x^2 and x rotated around the x or y axis)
How do you get the top off of a kenmore washer (approx. 6 yearsold)?
Go to the following link. Most Sears Kenmore washers are made by Whirlpool and this is the most common problem. Even if this is not your problem there is a step-by-step instruction on how to open up your washer on the same page.
http://repair2000.com/coupling.htmlHow do you get the top off of a kenmore washer (approx. 6 yearsold)?
unplug,2 screws in back of control panel, flip the clips you loosened and remove panel... the whole outer shell may have to come off, top has clips that snap in and snap off...may have nuts to remove from underneath topHow do you get the top off of a kenmore washer (approx. 6 yearsold)?
Either it doesn't come off, or there will be screws located somewhere that will release it. These screws may even hold something down that's on the cover.
Saws-all
find the two interior clips near the front corners. Push in with a butter knife.
http://repair2000.com/coupling.htmlHow do you get the top off of a kenmore washer (approx. 6 yearsold)?
unplug,2 screws in back of control panel, flip the clips you loosened and remove panel... the whole outer shell may have to come off, top has clips that snap in and snap off...may have nuts to remove from underneath topHow do you get the top off of a kenmore washer (approx. 6 yearsold)?
Either it doesn't come off, or there will be screws located somewhere that will release it. These screws may even hold something down that's on the cover.
Saws-all
find the two interior clips near the front corners. Push in with a butter knife.
How to get a washer and dryer for the sims 2?
i've herd of sims resources and it doesn'twork How to get a washer and dryer for the sims 2?
well you could look for downloads on the net or make and produce your own scripts and mods for a washer and dryer for the sims 2. there is tutorials on web how to make your own scripts on mods on the game.How to get a washer and dryer for the sims 2?
Try www.modthesims2.com
edit: found one
http://www.modthesims2.com/showthread.ph鈥?/a>
well you could look for downloads on the net or make and produce your own scripts and mods for a washer and dryer for the sims 2. there is tutorials on web how to make your own scripts on mods on the game.How to get a washer and dryer for the sims 2?
Try www.modthesims2.com
edit: found one
http://www.modthesims2.com/showthread.ph鈥?/a>
Subscribe to:
Posts (Atom)